1、用于连接器装配及陶瓷插芯金属尾座及其他产品的压接装配。
2、使用气压不小于0.6~0.9Mpa,最大压力为1000kgf。
3、通过更换压接工装，可适应不同的零件装配及压接。
4、压力可调整，适应不同产品。
5、操作简单、可靠，加工效率高。
6、加工质量稳定。
7、维护、保养简单方便。
8、可提供连接器压接模、适配器及金属尾座压接模。

9、可根据客户需要，定制不同的压接工装。

1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly 
     of other products crimp.
2.  Use air pressure is not less than 0.6 ~ 0.9 Mpa, the maximum pressure for 1000 kgf.
3. By replacing the crimp tooling, can adapt to different parts assembly and the  
     crimping.
4.  Pressure can be adjusted to adapt to different products.
5.  Simple, reliable, high processing efficiency.
6.  Stable quality.
7.  Maintenance, simple and convenient.
8.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.
9.  According to customer needs, custom-made different crimping tooling.